This is a demo store. No orders will be fulfilled.

Details:
Description
  FortiAP-431F FortiAP-433F
Hardware
Hardware Type Indoor AP Indoor AP
Number of Radios 3 + 1 BLE 3 + 1 BLE
Number of Antennas 5 Internal + 1 BLE Internal 5 External (RP-SMA) + 1 BLE Internal
Antenna Type and Peak Gain PIFA:
4 dBi for 2.4 GHz, 5 dBi for 5 GHz
Omni directional rubber duck antenna:
4 dBi for 2.4 GHz, 6 dBi for 5 GHz
Frequency Bands (GHz) 2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
Radio 1 Capabilities Frequency Band: 2.4 GHz
Channel width: 4x4 20/40 MHz
Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024
MIMO chains: 4x4 service
Radio 2 Capabilities Frequency Band: 5.0 GHz
Channel width: 4x4 20/40/80MHz and 2x2 160MHz
contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024
Mimo chains: 4x4 service
Radio 3 Capabilities Frequency band: 2.4/5.0 GHz MIMO chains: 1x1 frequency scanning
Maximum Data Rate Radio 1: up to 1147 Mbps
Radio 2: up to 2402 Mbps
Radio 3: scan only
Radio 1: up to 1147 Mbps
Radio 2: up to 2402 Mbps
Radio 3: scan only
Bluetooth Low Energy Radio Bluetooth scanning and iBeacon advertisement @ 6 dBm max TX power
Interfaces 1x 100/1000/2500 Base-T RJ45,
1 x 10/100/1000 Base-T RJ45,
1x Type A USB, 1x RS-232 RJ45 Serial Port
Power over Ethernet (PoE) 802.3at PoE default
1 port powered by 802.3at or 2 ports powered by 802.3af
- Full System functionality + USB support 1 port is connected to 802.3af - No USB support, Operate
in 2x2 mode with reduced power R1/R2 17dBm(Tx power)
Simultaneous SSIDs Up to 16 (14 if background scanning enabled)
EAP Type(s) EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
User/Device Authentication WPAâ„¢, WPA2â„¢, and WPA3â„¢ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist
Maximum Tx Power (Conducted) Radio 1: 2.4 GHz 24 dBm / 251 mW (4 chains combined)*
Radio 2: 5 GHz 23 dBm / 200 mW (4 chains combined)*
Radio 3: NA
Kensington Lock Yes Yes
IEEE Standards 802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w,
802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz
SSID Types Supported Local-Bridge, Tunnel, and Mesh Local-Bridge, Tunnel, and Mesh
Per Radio Client Capacity 512 clients per radio (Radio1 and Radio2) 512 clients per radio (Radio1 and Radio2)
Cellular Co-existence Yes Yes
LED Off Mode Yes Yes
Reset Button Yes Yes
Advanced 802.11 Features
OFDMA Yes (UL and DL) Yes (UL and DL)
2.4 GHz OFDMA Yes Yes
Spatial Reuse (BSS Coloring) Yes Yes
UL MU-MIMO 802.11ax mode Yes Yes
DL-MU-MIMO Yes Yes
HE-MU-MIMO Yes Yes
Enhanced Target Wake Time (TWT) Yes Yes
ZeroWait DFS/Agile DFS No No
Wireless Monitoring Capabilities
Rogue Scan radio modes Background, Dedicated Background, Dedicated
WIPS / WIDS radio modes Background, Dedicated (recommended)
Packet Sniffer Mode Yes Yes
Spectrum Analyzer Yes Yes
Dimensions
Length x Width x Height 8.27 x 8.27 x 2.22 inches (210 x 210 x 56.5 mm)
Weight 2.16 lbs (0.98 kg) 2.19 lbs (0.995 kg)
Mounting Options Ceiling, T-Rail, and Wall Ceiling, T-Rail, and Wall
Included Accessories Mount kit for Ceiling, T-Rail and Wall Mount kit for Ceiling, T-Rail and Wall. 5 RP-SMA Male dual-band dipole antenna
Environment
Power Supply SP-FAP400-PA-XX or GPI-130 SP-FAP400-PA-XX or GPI-130
Power Consumption (Maximum) 24.5 W
Humidity 5 - 90% non condensing
Operating / Storage Temperature 32–113°F (0–45°C) / -31–-94°F (-35–70°C)
Directives Low Voltage Directive • RoHS
UL2043 Plenum Material No No
Mean Time Between Failures > 10 Years > 10 Years
Surge Protection Built In Yes Yes
Hit-less PoE Failover Yes Yes
Certifications
WiFi Alliance Certified Yes Yes
DFS FCC, IC, CE, Japan, Korea, Taiwan
Warranty
Limited Lifetime Warranty Yes Yes

CONTACT US TO LEARN MORE

ABOUT Fortinet FortiAP 431F

Fill out the form and our team will get back to you.

What are you looking for?