This is a demo store. No orders will be fulfilled.

Details:
Description

Item

Specification

Part numbers

Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas

  C9105AXI-x: Cisco Catalyst 9105 Series

Cisco Catalyst 9105AX Access Point: Wall Plate, with internal antennas

  C9105AXW-x: Cisco Catalyst 9105 Series

Cisco Catalyst 9105AX Teleworker Access Point: Indoor environments, with internal antennas

  C9105AXIT-x: Cisco Catalyst 9105 Series

Cisco Catalyst 9105AX Teleworker Access Point: Wall Plate, with internal antennas

  C9105AXWT-x: Cisco Catalyst 9105 Series

Cisco Catalyst 9105AX Access Point: Indoor environments, with internal antennas, with embedded wireless controller

  C9105AXI-EWC-x: Cisco Catalyst 9105 Series

Regulatory domains: (x = regulatory domain)

Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.

Cisco Wireless LAN Services

(Shipped along with Infrastructure kit - Power Injector and Ethernet Cables) (Shipped along with Wall Plate kit - Cradle and Ethernet Cables)

Accessories

  Mounting bracket: AIR-AP-BRACKET-W4= (available as spare)
  Spacer kit: C9105AXW-KIT (sold separately)

Software

Catalyst 9105 AXI

  Cisco Unified Wireless Network Software Release 8.10.MR3 or later
  Cisco IOS XE Software Release 17.3.1, or later

Catalyst 9105AXW

  Cisco Unified Wireless Network Software Release 8.10MR3 or later
  Cisco IOS XE Software Release 17.3.1 or later

Supported wireless LAN controllers

  Cisco Catalyst 9800 Series Wireless Controllers
  Cisco 3504, 5520, and 8540 Wireless Controllers and Cisco Virtual Wireless Controller

802.11n version 2.0 (and related) capabilities

  2x2 MIMO with two spatial streams
  Maximal Ratio Combining (MRC)
  802.11n and 802.11a/g
  20- and 40-MHz channels
  PHY data rates up to 444.4 Mbps (40 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: Aggregate MAC Protocol Data Unit (A-MPDU) (transmit and receive), Aggregate MAC Service Data Unit (A-MSDU) (transmit and receive)
  802.11 Dynamic Frequency Selection (DFS)
  Cyclic Shift Diversity (CSD) support

802.11ac

  2x2 downlink MU-MIMO with two spatial streams
  MRC
  802.11ac beamforming
  20-, 40-, 80- MHz channels
  PHY data rates up to 866.7 Mbps (80 MHz with 5GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support
  WPA3 support

802.11ax

  2x2 uplink/downlink MU-MIMO with two spatial streams
  Uplink/downlink OFDMA
  TWT
  BSS coloring
  MRC
  802.11ax beamforming
  20-, 40-, 80- channels
  PHY data rates up to 1.488 Gbps (80 MHz with 5 GHz and 20 MHz with 2.4 GHz)
  Packet aggregation: A-MPDU (transmit and receive), A-MSDU (transmit and receive)
  802.11 DFS
  CSD support
  WPA3 support

Integrated antenna

Catalyst 9105AXW

  2.4 GHz: Peak gain 3 dBi, internal antenna
  5 GHz: Peak gain 5 dBi, internal antenna

Catalyst 9105AXI

  2.4 GHz: Peak gain 4 dBi, internal antenna, omnidirectional in azimuth
  5 GHz: Peak gain 5 dBi, internal antenna, omnidirectional in azimuth

Interfaces

Catalyst 9105AXW

  1x 100/1000/2500 Base-T (Ethernet) Uplink Interface
  3x 10/100/1000 Base-T (Ethernet) Downlink Interface (LAN1,LAN2 and LAN3, LAN1 supports 10.5W PSE Power Budget)
  Management console port (RJ-45)
  USB 2.0 at 4.5W
  Passthru Port

Catalyst 9105AXI

  1x 10/100/1000 Base-T (Ethernet) Uplink Interface
  Management console port (RJ-45)

Indicators

  Status LED indicates boot loader status, association status, operating status, boot loader warnings, and boot loader errors

Dimensions
(W x L x H)

  Access point (without mounting brackets):

    C9105AXW: 3.54 x 6.3 x 1.3 in. (90 x 160 x 32.66 mm)

    C9105AXI: 5.9 x 5.9 x 1.18 in. (150 x 150 x 30 mm)

Weight

Cisco Catalyst 9105AXW

  0.8 lb. (373.2g)

Cisco Catalyst 9105AXI

  0.7 lb. (329.5g)

Input power requirements

  802.3at Power over Ethernet Plus (PoE+), Cisco Universal PoE (Cisco UPOE)
  Cisco power injector, AIR-PWRINJ6=
  802.3af PoE
  Cisco power injector, AIR-PWRINJ5= ( Note: This injector supports only 802.3af)

Catalyst 9105AXI

PoE power

2.4-GHz radio

5-GHz radio

Link speed

802.3af (PoE)

2x2

2x2

1G

Catalyst 9105AXW

PoE power

2.4-GHz radio

5-GHz radio

Link speed

USB

LAN1 PSE

802.3af (PoE)

2x2

2x2

2.5G mGig

Disabled

Disabled

802.3at (PoE+)

2x2

2x2

2.5G mGig

Either USB or LAN1 PSE enabled.

Environmental

Cisco Catalyst 9105AXW

  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
  Operating temperature: 32° to 122°F (0° to 50°C)
  Operating humidity: 10% to 90% (noncondensing)
  Operating altitude test: 40˚C, 9843 ft (3000 m)

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio and the USB interface and LAN1 PSE will be disabled.

Cisco Catalyst 9105AXI

  Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
  Nonoperating (storage) altitude test: 25˚C, 15,000 ft (4600 m)
  Operating temperature: 32° to 122°F (0° to 50°C)
  Operating humidity: 10% to 90% (noncondensing)
  Operating altitude test: 40˚C, 9843 ft.(3000 m)

Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 2x2 to 1x1 on the 2.4 GHz radio.

Available transmit power settings (Max/Min)

  2.4 GHz

    20 dBm (100 mW)

    -7 dBm (0.2 mW)

  5 GHz

    20 dBm (100 mW)

    -7 dBm (0.2 mW)

Regulatory domains

Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.

For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.

Compliance

  Safety:

    IEC 60950-1

    EN 60950-1

    UL 60950-1

    IEC 62368-1

    EN 62368-1

    UL/CUL 62368 – 1

    CAN/CSA-C22.2 No. 60950-1

    AS/NZS60950.1

    UL 2043 – Only for C9105AXI

    Class III equipment

  Emissions:

    CISPR 32 (rev. 2015)

    EN 55032 (rev. 2012/AC:2013)

    EN 55032 (rev. 2015)

    EN61000-3-2 (rev. 2014)

    EN61000-3-3 (rev. 2013)

    KN61000-3-2

    KN61000-3-3

    AS/NZS CISPR 32 Class B (rev. 2015)

    47 CFR FCC Part 15B

    ICES-003 (rev. 2016 Issue 6, Class B)

    VCCI-CISPR 32

    CNS (rev. 13438)

    KN-32

    QCVN 118:2018/BTTTT

  Immunity:

    CISPR 24 (rev. 2010)

    EN 55024 + AMD 1 (rev. 2010)

    EN 55035: 2017

    KN35

  Emissions and immunity:

    EN 301 489-1 (v2.1.1 2017-02)

    EN 301 489-17 (v3.1.1 2017-02)

    QCVN (18:2014)

    QCVN 112:2017/BTTTT

    KN 489-1

    KN 489-17

    EN 61000-6-1: 2007

  Radio:

    EN 300 328 (v2.1.1)

    EN 301 893 (v2.1.1)

    AS/NZS 4268 (rev. 2017)

    47 CFR FCC Part 15C, 15.247, 15.407

    RSP-100

    RSS-GEN

    RSS-247

    China regulations SRRC

    LP0002 (rev 2018.1.10)

    Japan Std. 33a, Std. 66, and Std. 71

  RF safety:

    EN 50385 (rev. Aug 2002)

    ARPANSA

    AS/NZS 2772 (rev. 2016)

    EN 62209-1 (rev. 2016)

    EN 62209-2 (rev. 2010)

    47 CFR Part 1.1310 and 2.1091

    RSS-102

  IEEE standards:

    IEEE 802.3

    IEEE 802.3ab

    IEEE 802.3af/at

    IEEE 802.11a/b/g/n/ac/ax

    IEEE 802.11h, 802.11d

  Security:

    802.11i, Wi-Fi Protected Access 2 (WPA2), WPA3

    802.1X

    Advanced Encryption Standard (AES)

  Extensible Authentication Protocol (EAP) types:

    EAP-Transport Layer Security (TLS)

    EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2

    Protected EAP (PEAP) v0 or EAP-MSCHAP v2

    EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)

    PEAP v1 or EAP-Generic Token Card (GTC)

    EAP-Subscriber Identity Module (SIM)

Datarate/Transmit Power/ Receive sensitivity

  For information about Datarate, Transmit power and Receive Sensitivity, refer to Cisco RF details

Transmit power and receive sensitivity

 

 

 

5 GHz Radio

2.4 GHz Radio

 

Spatial streams

Number of active antennas

Total TX power (dBm)

RX sensitivity (dBm)

Total TX power (dBm)

RX sensitivity (dBm)

802.11/11b

1 Mbps

1

2

20

-99

11 Mbps

1

2

20

-91

802.11a/g

6 Mbps

1

2

20

-97

20

-93

24 Mbps

1

2

20

-89

20

-86

54 Mbps

1

2

20

-80

20

-78

802.11n HT20

MCS0

1

2

20

-96

20

-93

MCS15

2

2

20

-75

20

-73

802.11n HT40

MCS0

1

2

20

-93

MCS15

2

2

20

-72

802.11ac VHT20

MCS0

1

2

20

-96

MCS8

1

2

20

-74

MCS0

2

2

20

-94

MCS8

2

2

20

-71

MCS9

2

2

-

-

802.11ac VHT40

MCS0

1

2

20

-93

MCS9

1

2

20

-69

MCS0

2

2

20

-91

MCS9

2

2

20

-66

802.11ac VHT80

MCS0

1

2

20

-90

MCS9

1

2

20

-66

MCS0

2

2

20

-88

MCS9

2

2

20

-63

802.11ax HE20

MCS0

1

2

20

-96

20

-93

MCS11

1

2

19

-66

19

-64

MCS0

2

2

20

-95

20

-91

MCS11

2

2

19

-65

19

-63

802.11ax HE40

MCS0

1

2

20

-93

MCS11

1

2

19

-63

MCS0

2

2

20

-92

MCS11

2

2

19

-62

802.11ax HE80

MCS0

1

2

20

-90

MCS11

1

2

19

-60

MCS0

2

2

20

-89

MCS11

2

2

19

-59

CONTACT US TO LEARN MORE

ABOUT Cisco Catalyst 9105

Fill out the form and our team will get back to you.

What are you looking for?