This is a demo store. No orders will be fulfilled.

Details:
Description
Category Specifications
SSID per Radio/Total 8/16
Users per Radio/Total 512/1024
802.11a
  • 5.150–5.850 GHz Operating Frequency
  • Orthogonal Frequency Division Multiplexing (OFDM Modulation)
  • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11b
  • 2.4–2.5 GHz Operating Frequency
  • Direct-Sequence Spread-Spectrum (DSSS) Modulation
  • Rates (Mbps): 11, 5.5, 2, 1 w/auto fallback
802.11g
  • 2.4–2.5 GHz Operating Frequency
  • Orthogonal Frequency Division Multiplexing (OFDM) Modulation
  • Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 w/auto fallback
802.11n
  • 2.4–2.5 GHz and 5.150–5.850 GHz Operating Frequency
  • 802.11n Modulation
  • Rates (Mbps): MCS0 - MCS15 (6.5MBps - 300Mbps)
  • 2x2 Multiple-In, Multiple-Out (MIMO) Radio
  • HT20 High-Throughput (HT) Support (for both 2.4 GHz and 5 GHz)
  • HT40 High-Throughput (HT) Support for 5 GHz
  • A-MPDU and A-MSDU Frame Aggregation
802.11ac
  • 5.150–5.850 GHz Operating Frequency
  • 802.11ac Modulation (256-QAM)
  • Rates (Mbps): MCS0–MCS9 (6.5Mbps – 867Mbps), NSS = 1-2
  • 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
  • VHT20/VHT40/VHT80 support
  • TxBF (Transmit Beamforming)
802.11ax
  • 2.4–2.5 GHz & 5.150–5.850 GHz Operating Frequency
  • 802.11ax Modulation (1024-QAM)
  • Dual-band OFDMA
  • Rates (Mbps):
    • 5G: HE0-HE11 (8 Mbps – 1200 Mbps)
    • 2.4G: HE0-HE11 (8 Mbps – 574 Mbps)
  • 2x2:2 Stream Multiple-In, Multiple-Out (MIMO) Radio
  • HE20/HE40/HE80 support for 5 GHz
  • HE20/HE40 support for 2.4 GHz
  • DL SU-MIMO and MU-MIMO
  • TxBF (Transmit Beamforming)
Interfaces (2) Autosensing 10/100/1000 Ethernet
Power Specifications IEEE 802.3af PoE Power
Radios
  • BLE Radio Bluetooth® Low Energy (BLE) and IEEE® 802.15.4 compliant
  • Internal GPS - accuracy is 2.5m- 3m in open sky
Peak Gain
  • Software Mode: Radio 1: 2.4 Ghz 4.2 dBi, Radio 2: 5 Ghz 4.74dBi, Radio 3: 4.5 dBi
  • Sensor on R1: 2.4 Ghz 4.2dBi, 5 Ghz 4.5dBi, 5 Ghz 4.74dBi
  • Dual 5G: 5 Ghz 4.5dBi, 5 Ghz 4.74dBi, 4.5 dBi
Power Options
  • Power Draw: Typical: 9.5W Max: 12.1W
  • 802.3af Power over Ethernet (PoE) capable Gigabit Ethernet port (RJ-45 power input pins: Wires 4,5,7,8 or 1,2,3,6)
  • 802.3af Power over Ethernet injector
Physical
  • Dimensions: 7.4" x 5.7" x 1.9" (190mm x 145mm x 50mm)
  • AP360i/e: estimate 2.2 lbs (1.0kg)
Antennas
  • AP360i - Internal Antennas
  • (2) Integrated dual band, 2.4-2.5 GHz and 5.1-5.8 GHz omnidirectional antennas
  • (2) Integrated single band, 5.1-5.8 GHz omnidirectional antennas
  • (1) Integrated single band, 2.4-2.5 GHz omnidirectional antennas for BLE
Mounting
  • Pole Mount with 15 degree tilt (sold as an accessory)
  • 12" Extension arm (sold as an accessory)
  • 10" Extension w/2-axis 80 degree tilt (sold as an accessory)
Environmental
  • Operating: - 40°C to 60°C, Storage: -40 to 70 °C
  • Humidity: 10% to 95% (non-condensing)
Environmental Discharge +/-4 kV (contact discharge)/ +/-8 kV (Air Discharge)
Regulatory Compliance
  • FCC CFR 47 Part 15, Class B
  • ICES-003, Class B
  • FCC Subpart C 15.247
  • FCC Subpart E 15.407
  • RSS247
  • AS/NZS4268 + CISPR32
  • IEC/EN 60601-1-2
  • EN 62311
  • EN 50385
  • EN 301 489-1
  • EN 301 489-17
  • EN 55032, (Class B)
  • EN 55011, (Group 1, Class B)
  • EN 55024
  • EN 61000-3-2
  • EN 61000-3-3
  • EN 300 328
  • EN 301 893
  • EN 50581
  • IR2030/8/3
Radio Approvals The AP302W is covered under Extreme’s Universal LLW policy.
Support 1 Year Warranty

CONTACT US TO LEARN MORE

ABOUT Extreme AP360i/e Access Point

Fill out the form and our team will get back to you.

What are you looking for?