JavaScript seems to be disabled in your browser. For the best experience on our site, be sure to turn on Javascript in your browser.
This is a demo store. No orders will be fulfilled.
Cisco delivers a comprehensive portfolio of switching solutions for Enterprise Networks, data centers, and smaller businesses. These solutions are optimized for a wide range of industries, including service providers, financial services, and the public sector.
As a trusted Cisco reseller, ServerMonkey offers the Cisco Catalyst 9130 Series at competitive rates, providing businesses with access to top-tier networking hardware.
Item
Specification
Part numbers
Cisco Catalyst 9130AXI Access Point: Indoor environments, with internal antennas
Cisco Catalyst 9130AXE Access Point: Challenging indoor environments, with external antennas
Cisco Catalyst 9130AXE-STA Access Point: C9130 AP with C-ANT9104 Stadium antenna
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global Price List and/or regional price lists.
Cisco Wireless LAN Services
Software
Catalyst 9130AXI
Catalyst 9130AXE
Cisco Catalyst 9130AXE Stadium Antenna Access Point, external antenna (C-ANT9104)
Supported wireless LAN controllers
802.11n version 2.0 (and related) capabilities
802.11ac
802.11ax
Integrated antenna
External antenna with smart antenna connector
Interfaces
Indicators
Dimensions (W x L x H)
◦ C9130AXI: 8.9 x 8.9 x 1.88 in. (22.6 x 22.6 x 4.8 cm)
◦ C9130AXE: 9.17 x 9.17 x 1.58 in. (23.3 x 23.3 x 4.0 cm)
◦ C9130AXE-STA: 18.2 X 23.5 X 5.8 in. (59.70 X 46.23 X 14.8 cm)
Weight
Cisco Catalyst 9130AXI
Cisco Catalyst 9130AXE
Cisco Catalyst 9130AXE-STA
Input power requirements
Power source
2.4-GHz radio
5-GHz radio
Link speed
USB
Max PoW Power Consumption
802.3at (PoE+)
4x4
8x8
5G
N
25.5W
Y [4.5W]
802.3bt (Cisco UPOE)
30.5W
Max PoE Power Consumption
Cisco Catalyst 9130AXI and 9130AXE
802.3af
PoE
1x1
1G
13.4W
Note: Actual power consumption may very depending on AP usage. It is recommended that you ensure that LLDP/CDP is enabled to allow proper power negotiation.
Environmental
Note: When the ambient operating temperature exceeds 40°C, the access point will shift from 8x8 to 4x4 on the 5 GHz radio, uplink Ethernet will downgrade to 1 Gigabit Ethernet; however, the USB interface will remain enabled.
System memory
Warranty
Limited lifetime hardware warranty
Available transmit power settings
2.4 GHz
5 GHz
Regulatory domains
Note: Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, visit https://www.cisco.com/go/aironet/compliance.
For information about regulatory domain support, refer to the Cisco Regulatory Domain White Paper.
Compliance standards
◦ IEC 60950-1
◦ EN 60950-1
◦ UL 60950-1
◦ CAN/CSA-C22.2 No. 60950-1
◦ AS/NZS60950.1
◦ UL 2043
◦ Class III equipment
◦ CISPR 32 (rev. 2015)
◦ EN 55032 (rev. 2012/AC:2013)
◦ EN 55032 (rev. 2015)
◦ EN61000-3-2 (rev. 2014)
◦ EN61000-3-3 (rev. 2013)
◦ KN61000-3-2
◦ KN61000-3-3
◦ AS/NZS CISPR 32 Class B (rev. 2015)
◦ 47 CFR FCC Part 15B
◦ ICES-003 (rev. 2016 Issue 6, Class B)
◦ VCCI-CISPR 32
◦ CNS (rev. 13438)
◦ KN-32
◦ QCVN 118:2018/BTTTT
◦ CISPR 24 (rev. 2010)
◦ EN 55024 + AMD 1(rev. 2010)
◦ EN 55035: 2017
◦ KN35
◦ EN 301 489-1 (v2.1.1 2017-02)
◦ EN 301 489-17 (v3.1.1 2017-02)
◦ QCVN (18:2014)
◦ QCVN 112:2017/BTTTT
◦ KN 489-1
◦ KN 489-17
◦ EN 60601-1-2:2015
◦ EN 61000-6-1: 2007
◦ EN 300 328 (v2.1.1)
◦ EN 301 893 (v2.1.1)
◦ AS/NZS 4268 (rev. 2017)
◦ 47 CFR FCC Part 15C, 15.247, 15.407
◦ RSP-100
◦ RSS-GEN
◦ RSS-247
◦ China regulations SRRC
◦ LP0002 (rev 2018.1.10)
◦ Japan Std. 33a, Std. 66, and Std. 71
◦ EN 50385 (rev. Aug 2002)
◦ ARPANSA
◦ AS/NZS 2772 (rev. 2016)
◦ EN 62209-1 (rev. 2016)
◦ EN 62209-2 (rev. 2010)
◦ 47 CFR Part 1.1310 and 2.1091
◦ RSS-102
◦ IEEE 802.3
◦ IEEE 802.3ab
◦ IEEE 802.3af/at
◦ IEEE 802.11a/b/g/n/ac/ax
◦ IEEE 802.11h, 802.11d
◦ 802.11i, (WPA2, WPA3
◦ 802.1X
◦ Advanced Encryption Standard (AES)
◦ EAP-Transport Layer Security (TLS)
◦ EAP-Tunneled TLS (TTLS) or Microsoft Challenge Handshake Authentication Protocol (MSCHAP) v2
◦ Protected EAP (PEAP) v0 or EAP-MSCHAP v2
◦ EAP-Flexible Authentication via Secure Tunneling (EAP-FAST)
◦ PEAP v1 or EAP-Generic Token Card (GTC)
◦ EAP-Subscriber Identity Module (SIM)
Data rate, transmit power, receive sensitivity
For more detailed information about data rate, transmit power, and receive sensitivity, please refer to the Cisco RF details.
Transmit (Tx) power and receive (Rx) sensitivity
5-GHz primary radio
5-GHz secondary radio
Spatial streams
Number of active antennas
Total Tx power (dBm)
Rx sensitivity (dBm)
802.11/11b
1 Mbps
1
4
–
23
-104
11 Mbps
-96
802.11a/g
6 Mbps
-100
-99
-98
24 Mbps
22
-92
-91
54 Mbps
21
-84
-83
20
-82
802.11n HT20
MCS0
MCS31
-77
-75
802.11n HT40
802.11ac VHT20
MCS9
8
26
-102
MCS8
-73
802.11ac VHT40
19
-69
802.11ac VHT80
-93
-65
-64
-95
802.11ac VHT160
-89
-61
802.11ax HE20
MCS11
18
-66
17
802.11ax HE40
-63
-62
802.11ax HE80
-59
802.11ax HE160
-88
-56
Fill out the form and our team will get back to you.
2130 W Sam Houston Pkwy NHouston, TX 77043