ARUBA access points allow you to deploy and manage high-speed networks while also providing best-in-class security, reliable network performance, and flexible scalability. Browse Aruba solutions or contact a servermonkey expert and start your journey to a growing high-performance, secure network solution that can grow with you.

As a trusted Aruba reseller, ServerMonkey offers the Aruba Outdoor and Ruggedized AP 670 Series at competitive rates, providing businesses with access to top-tier networking hardware.

Request a Quote

Details:

Description

Hardware variants
HPE Aruba Networking AP-675 Built in omnidirectional antennas 2.4 GHz antennas 3.5dBi 5 GHz antennas 5dBi 6 GHz antennas 5dBi BLE/Zigbee: Integrated omnidirectional antenna with peak gain of 6dBi HPE Aruba Networking AP-677 Built in directional antennas 2.4 GHz antennas 5.6dBi 5 GHz antennas 6dBi 6 GHz antennas 7dBi BLE/Zigbee: Integrated omnidirectional antenna with peak gain of 8dBi HPE Aruba Networking AP-679 Built in dynamic directional antennas 2.4 GHz antennas 6dBi 5 GHz antennas Wide 9dBi Narrow 12dBi 6 GHz antennas Wide 9dBi Narrow 13dBi BLE/Zigbee: Integrated omnidirectional antenna with peak gain of 6dBi

Hardware variants

HPE Aruba Networking AP-675
- Built in omnidirectional antennas
- 2.4 GHz antennas 3.5dBi
- 5 GHz antennas 5dBi
- 6 GHz antennas 5dBi
- BLE/Zigbee: Integrated omnidirectional antenna with peak gain of 6dBi
HPE Aruba Networking AP-677
- Built in directional antennas
- 2.4 GHz antennas 5.6dBi
- 5 GHz antennas 6dBi
- 6 GHz antennas 7dBi
- BLE/Zigbee: Integrated omnidirectional antenna with peak gain of 8dBi
HPE Aruba Networking AP-679
- Built in dynamic directional antennas
- 2.4 GHz antennas 6dBi
- 5 GHz antennas
  - Wide 9dBi
  - Narrow 12dBi
- 6 GHz antennas
  - Wide 9dBi
  - Narrow 13dBi
- BLE/Zigbee: Integrated omnidirectional antenna with peak gain of 6dBi

Wi-Fi radio specifications
AP type: Outdoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO 2.4 GHz radio: Two spatial stream single user (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices 5 GHz radio: Two spatial stream single user (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices 6 GHz radio: Two spatial stream single user (SU) MIMO for up to 2.4 Gbps wireless data rate with 2SS HE160 802.11ax client devices Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 8 for the 6GHz radio) Supported frequency bands (country-specific restrictions apply): 2.400 to 2.4835 GHz ISM 5.150 to 5.250 GHz U-NII-1 5.250 to 5.350 GHz U-NII-2 5.470 to 5.725 GHz U-NII-2E 5.725 to 5.850 GHz U-NII-3/ISM 5.850 to 5.895 GHz U-NII-4 5.925 to 6.425 GHz U-NII-5 6.425 to 6.525 GHz U-NII-6 6.525 to 6.875 GHz U-NII-7 6.875 to 7.125 GHz U-NII-8 Available bands and channels: Dependent on configured regulatory domain (country) Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5 GHz band Supported radio technologies: 802.11b: Direct-sequence spread-spectrum (DSSS) 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM) 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units (37 for the 6GHz radio) Supported Modulation Types 802.11b: BPSK, QPSK, CCK 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM (proprietary extension) 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension) 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, and 1024-QAM 802.11n high-throughput (HT) support: HT20/40 802.11ac very high throughput (VHT) support: VHT20/40/80 802.11ax high efficiency (HE) support: HE20/40/80/160 Supported data rates (Mbps): 802.11b: 1, 2, 5.5, 11 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM (proprietary extension) 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80); 1,083 with 1024-QAM (MCS10 and MCS11, proprietary extension) 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40) 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80) 802.11ax (6GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160) 802.11n/ac packet aggregation: A-MPDU, A-MSDU Transmit power: Configurable in increments of 0.5 dBm Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements) Per radio/band (2.4 GHz/5 GHz/6 GHz): +25 dBm (18 dBm per chain) Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain. Advanced cellular coexistence (ACC) minimizes the impact of interference from cellular networks Maximum ratio combining (MRC) for improved receiver performance Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance Space-time block coding (STBC) for increased range and improved reception Low-density parity check (LDPC) for high-efficiency error correction and increased throughput Transmit beamforming (TxBF) for increased signal reliability and range 802.11ax Target Wait Time (TWT) to support low-power client devices 802.11mc Fine Timing Measurement (FTM) for precision distance ranging

Wi-Fi radio specifications

AP type: Outdoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2x2 MIMO
2.4 GHz radio: Two spatial stream single user (SU) MIMO for up to 574 Mbps wireless data rate with 2SS HE40 802.11ax client devices
5 GHz radio: Two spatial stream single user (SU) MIMO for up to 1.2 Gbps wireless data rate with 2SS HE80 802.11ax client devices
6 GHz radio: Two spatial stream single user (SU) MIMO for up to 2.4 Gbps wireless data rate with 2SS HE160 802.11ax client devices
Up to 512 associated client devices per radio, and up to 16 BSSIDs per radio (limited to 8 for the 6GHz radio)
Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz ISM
- 5.150 to 5.250 GHz U-NII-1
- 5.250 to 5.350 GHz U-NII-2
- 5.470 to 5.725 GHz U-NII-2E
- 5.725 to 5.850 GHz U-NII-3/ISM
- 5.850 to 5.895 GHz U-NII-4
- 5.925 to 6.425 GHz U-NII-5
- 6.425 to 6.525 GHz U-NII-6
- 6.525 to 6.875 GHz U-NII-7
- 6.875 to 7.125 GHz U-NII-8
Available bands and channels: Dependent on configured regulatory domain (country)
Dynamic frequency selection (DFS) optimizes the use of available RF spectrum in the 5 GHz band
Supported radio technologies:
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units (37 for the 6GHz radio)
Supported Modulation Types
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM and 256-QAM (proprietary extension)
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM (proprietary extension)
- 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, and 1024-QAM
802.11n high-throughput (HT) support: HT20/40
802.11ac very high throughput (VHT) support: VHT20/40/80
802.11ax high efficiency (HE) support: HE20/40/80/160
Supported data rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM (proprietary extension)
- 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80); 1,083 with 1024-QAM (MCS10 and MCS11, proprietary extension)
- 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
- 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
- 802.11ax (6GHz): 3.6 to 2,402 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE160)
802.11n/ac packet aggregation: A-MPDU, A-MSDU
Transmit power: Configurable in increments of 0.5 dBm
Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements)
- Per radio/band (2.4 GHz/5 GHz/6 GHz): +25 dBm (18 dBm per chain)
- Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
Advanced cellular coexistence (ACC) minimizes the impact of interference from cellular networks
Maximum ratio combining (MRC) for improved receiver performance
Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
Space-time block coding (STBC) for increased range and improved reception
Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
Transmit beamforming (TxBF) for increased signal reliability and range
802.11ax Target Wait Time (TWT) to support low-power client devices
802.11mc Fine Timing Measurement (FTM) for precision distance ranging

Power
The AP supports power over ethernet (PoE) on port E0 Power sources are sold separately; see the HPE Aruba Networking 67 Series ordering guide for details When powered by 802.3bt (class 6) PoE, the AP will operate without restrictions. When powered by 802.3bt (class 5) PoE with the IPM feature disabled, the AP will disable the USB-C port. Operating the AP with an 802.3at (class 4) POE with the IPM feature disabled, the AP will disable the USB ports, the SFP port, and one of the two chains on the 2.4Ghz radio Operating the AP with an 802.3af (class 3 or lower) POE source is not supported (except for AP staging) With IPM enabled, the AP will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable. Maximum (worst-case) power consumption (without/with a USB device attached): PoE powered: 29W/45.5W. This assumes that up to 16.5W total is supplied the attached USB devices Maximum (worst-case) power consumption in idle mode: 11W/27.5W (both USB active at max). Maximum (worst-case) power consumption in deep-sleep mode: 3.2W (PoE).

Power

The AP supports power over ethernet (PoE) on port E0
Power sources are sold separately; see the HPE Aruba Networking 67 Series ordering guide for details
When powered by 802.3bt (class 6) PoE, the AP will operate without restrictions.
When powered by 802.3bt (class 5) PoE with the IPM feature disabled, the AP will disable the USB-C port.
Operating the AP with an 802.3at (class 4) POE with the IPM feature disabled, the AP will disable the USB ports, the SFP port, and one of the two chains on the 2.4Ghz radio
Operating the AP with an 802.3af (class 3 or lower) POE source is not supported (except for AP staging)
With IPM enabled, the AP will start up in unrestricted mode but may dynamically apply restrictions depending on the available power budget and actual consumption. The feature restrictions and order in which these get applied are configurable.
Maximum (worst-case) power consumption (without/with a USB device attached):
- PoE powered: 29W/45.5W.
- This assumes that up to 16.5W total is supplied the attached USB devices
Maximum (worst-case) power consumption in idle mode: 11W/27.5W (both USB active at max).
Maximum (worst-case) power consumption in deep-sleep mode: 3.2W (PoE).

CONTACT US TO LEARN MORE

ABOUT Aruba Outdoor and Ruggedized AP 670 Series

Fill out the form and our team will get back to you.

1-855-432-8918
[email protected]
2130 W Sam Houston Pkwy N
Houston, TX 77043

Aruba Outdoor and Ruggedized AP 670 Series

CONTACT US TO LEARN MORE

ABOUT Aruba Outdoor and Ruggedized AP 670 Series

What are you looking for?

Get to Know Us

Resources

What We Do

Customer Service

Follow Us